Connect PC HDMI > SCART > the VCR BLUE scart socket. Connect the VCR Black SCART directly to a TV. Set the TV so it "sees" that SCART input i.e. you are watching what the VCR is doing. You may, for example, be able to get some on-screen (setup) menu from the VCR to show on the TV screen. The Ultimate Guide to SCART Connectors and Cables. SCART cables and connectors are used for connecting audio-visual devices. The European standard was created in France and introduced in 1977 as a way to standardise inputting signals. The SCART system came to replace RF antenna connectors and became a standard on AV equipment like DVD players Here is one on ebay for $10. I just linked the first one I found. https /www.ebay.com/itm/HD-1080P-Scart-To-HDMI-Video-Audio-Upscaler-Converter-Adapter-For-TV-DVD-Sky Total overkill for the purposes described here, but it accepts DVI-D (=HDMI video!) and can output 576p RGB. And it's cheaper than buying a VSC 500 in the US and getting it shipped across the pond, plus needing a separate HDMI-VGA adapter. All you need is a passive HDMI->single link DVI cable or connector adapter. SCART to HDMI Converter: SCART to HDMI converter can convert SCART signal (RGB or Analog video signal) into HDMI signal, and has 3.5mm stereo and coaxial audio signal output. It can be easily connected to Blu-ray DVD, set-top box, Sky Box, etc. So should work fine once an F connector is put on the cable and its connected to a freesat box. For the OP. Maplin Metal Twist On CT100 F Plug | Maplin. This is a link to a twist on F connector that you need for the cable. Put one of those on and screw it to the connection on the box. DVD to MacBook Pro I have a MacBook Pro (Retina, 15-inch, Mid 2015) running Big Sur 11.4. I would like to play DVDs on it using a Samsung player. Will I need an HDMI to thunderbolt adapter, since the HDMI port is for output only? Plug your source’s coax into the “Coax In” connection on the converter. Insert the HDMI cable into the “HDMI Out” on your converter. Connect the other end of the HDMI cable to your HDTV What has been reported on the matter suggests that the message only occurs if the TV connected via HDMI is switched off or left in standby while attempting to use the SCART output. One solution is to initially ensure both TVs are powered up and then turn the HDMI TV off if only wanting to use the SCART connection on its own. The SCART to HDMI adapter has an HDMI port and a SCART port. Below, you can see how to properly connect the SCART to HDMI adapter to your old device and new TV. Using the SCART cable, connect your old device directly to the SCART to HDMI adapter. Now, with the HDMI cable, connect your HDMI enabled television to the SCART to HDMI adapter. 5COBcpI.